模塊化愛好油漆架 - 小墻掛

Sixth of the modular paint racks to store and organize hobby paints. This one is a smaller straight section that is for wall hanging. I designed this to hold Vallejo or Reaper dropper paint bottles. I will be adding more shelf layouts to hold paints such as Miniataire, GW and othe!
Capacity:
20 dropper bottles (Vallejo, Reaper, Army Painter)
16 Minitaire bottles
Dropper style bottles can be stored in the upright or inverted position. I designed it more for the inverted position as that is the way I hold my paints to prevent tip dry out.
You will need to print the following to assemble one unit:
One of the following:
LeftSide-WallSmall
RightSide-WallSmall
BackSupportBottom-WallSmall
BackSupportTop-WallSmall
Four of the following
FrontHolder-WallSmall-(bottle style)
BackHolder-WallSmall-(bottle style)
To attach the top back support I have added screw fastene since it will be hanging on the wall. You will need two 6-32 1/2" flat head machine screws and nuts. These are readily available at most big box hardware stores. After assembly just put the screws in with the head on the outside and hand tighten till secure.
The hanging holes in the back are made to take #4 screws. Use wall ancho if not drilling directly into a wall stud to hang.
Luckily these pieces would fight on the print bed but if it doesn't on you you may have to split them and glue the two halves together. Assemble with the tabs and slots. I would also suggest glue just to be safe in case you have to move it even though the fit should be pretty tight.
Hope you enjoy this and it gives you more optio to tidy up your painting desk.
Other units in the series:
Large Straight -
Small Straight -
Iide Corner -
Outside Corner -
Tool Holder -
Upcoming:
Additional shelves for more paint brands
Revision History:
01/18/2018 - Added two new files for Minitaire paints. The new front holder and a new back holder for the very bottom BackHolder-WallSmall-Minitaire.
Happy Printing!!!