迪威網(wǎng)友517b72
發(fā)布時間：2021/1/16 18:05:00
Featured In These YouTube Videos:
Pulling 1000LBS:
Lifting People:
Intro:
Also Appearing in:
Difficulty
Advanced
I suggest that you try printing one of my other smaller geaets before attempting to print this one because of the fact that it takes nearly a full spool of plastic to complete. If you have good luck and all the clearances seem right on a smaller gearbox of mine it's more likely that you will not have to print this one twice.
These gea have almost no clearance, which is perfect for robotics applicatio where backlash is bad, because you can spin it at high speed until it wea in and spi nicely, but in applicatio where backlash doesn't matter, or if your printer isn't perfectly calibrated it would be very smart to use horizontal expaion of (-.1) or (-.2)
Scaling individual gea will not provide any additional clearances, for reaso that are very hard to explain.
Torque Capabilities
Completely iane, beats the 160:1 by a long shot
Mine broke at 166.6 FT-LBS with 1,000 LBS 2" off center
Compatibility
This Design is NOT compatible with any of my previous desig in any way, Sorry!
How This Works
If you're using the included mounting apparatus, and mounting the gearbox with a rod through the 7/8" holes in the mounts, then rings #1 and #3 will be held stationary, and ring #2 will be the output.
If you were to design a custom mount for this and it held Ring gear #2 stationary, then ring gea #1 and #3 would be the output, and it would be wise to interconnect them with whatever you are mounting this in. If you do that the gear ratio will no longer be exactly 149.33:1
149.33 Tur of the input sun gear will result in ring gear #2 making one full rotation.
This gearbox can not be back-driven, every piece of plastic on it will snap before you get the input to turn. I will test it very soon.
Hardware Required:
Ten 125mm long 8mm diameter linear rods
For the mounting apparatus you need 4.5mm BB's for a BB gun (about 156 of em)if you wish to put load on this gearbox
Gear Ratio:
149.33:1 to 1
Other Important Info:
CAD Files??
The most recent veion of this project can be downloaded in lots of different formats from this link:
Feel free to create your own modificatio and parts for this project, and if you do, make sure you create a remix and upload them, I'll link to them and possibly create a collection for all of them!
Show Your Work!
Make a "make" and show everyone what you made! (make? :0) Everyone will thank you for it!
For More Cool Projects and Upgrades, Don't forget to Follow Me on Thingivee and Subscribe to my Youtube Channel
Gear Down For What?
Pulling 1000LBS:
Lifting People:
Intro:
Also Appearing in:
Difficulty
Advanced
I suggest that you try printing one of my other smaller geaets before attempting to print this one because of the fact that it takes nearly a full spool of plastic to complete. If you have good luck and all the clearances seem right on a smaller gearbox of mine it's more likely that you will not have to print this one twice.
These gea have almost no clearance, which is perfect for robotics applicatio where backlash is bad, because you can spin it at high speed until it wea in and spi nicely, but in applicatio where backlash doesn't matter, or if your printer isn't perfectly calibrated it would be very smart to use horizontal expaion of (-.1) or (-.2)
Scaling individual gea will not provide any additional clearances, for reaso that are very hard to explain.
Torque Capabilities
Completely iane, beats the 160:1 by a long shot
Mine broke at 166.6 FT-LBS with 1,000 LBS 2" off center
Compatibility
This Design is NOT compatible with any of my previous desig in any way, Sorry!
How This Works
If you're using the included mounting apparatus, and mounting the gearbox with a rod through the 7/8" holes in the mounts, then rings #1 and #3 will be held stationary, and ring #2 will be the output.
If you were to design a custom mount for this and it held Ring gear #2 stationary, then ring gea #1 and #3 would be the output, and it would be wise to interconnect them with whatever you are mounting this in. If you do that the gear ratio will no longer be exactly 149.33:1
149.33 Tur of the input sun gear will result in ring gear #2 making one full rotation.
This gearbox can not be back-driven, every piece of plastic on it will snap before you get the input to turn. I will test it very soon.
Hardware Required:
Ten 125mm long 8mm diameter linear rods
For the mounting apparatus you need 4.5mm BB's for a BB gun (about 156 of em)if you wish to put load on this gearbox
Gear Ratio:
149.33:1 to 1
Other Important Info:
CAD Files??
The most recent veion of this project can be downloaded in lots of different formats from this link:
Feel free to create your own modificatio and parts for this project, and if you do, make sure you create a remix and upload them, I'll link to them and possibly create a collection for all of them!
Show Your Work!
Make a "make" and show everyone what you made! (make? :0) Everyone will thank you for it!
For More Cool Projects and Upgrades, Don't forget to Follow Me on Thingivee and Subscribe to my Youtube Channel
Gear Down For What?
|
共個文件
壓縮包大?。?3MB
|
||
|---|---|---|
微信小程序
微信掃碼打開此模型
迪威模型
微信掃碼支付