迪威網友f6030e
發布時間：2021/1/12 23:53:00
Assembled using camera technology from different eras, 60s Japan 645 camera shutter le modern LOMO Polaroid back 3D printer body struc
Portable 3D Printing Refit Mini Veion Rainbow Polaroid SK1
In 2016,I modified a Polaroid mini camera (prototype) with a folded-back structure was traformed by using the interior of the Polaroid Rainbow Machine. It has a small size, a palm-sized body, a compact overall feel, and is very portable. Although the focus is estimated, but the playability is strong.
Some like it, so I used the free time recently to model the engineering 3D file from the new design. I used LOMO's mini film back and a cost-effective Konica Pearl II 645 camera to create a new one. The mini Polaroid was named SK1.
It has been revised and improved before and after, and various veio have been tested. The final shape is still small and portable. In particular, here is the Konica Pearl II 645/120 camera. The le assembly itself is more advanced for the whole group. The le has a convenient focus knob. The le is Konica's own hexar75 / 3.5. , The imaging quality is very good, the shutter speed is very complete and very powerful B \ 1 \ 2 \ 5 \ 10 \ 25 \ 50 \ 100 \ 250 \ 500, including the shutter line socket, the machine is cheaper in the second-hand market, it is very suitable for use Makeover. When remodeling, just remove its le. Of coue, other le shutter groups can also be used, but you must try it youelf.
The design of the fuselage 3D engineering file takes into account the characteristics of ordinary FDM melt-extrusion 3D printe, and breaks it into upper and lower parts to improve the printing success rate. It is recommended to use ABS / or industrial fiber / nylon, etc. Higher melting materials,
This SK1mini Polaroid can currently shoot focal lengths in the range of 0.5-1.5 mete, suitable for portraits and sketches, and the shutter is fully manual. The project file will be provided for Baidu web disk download. If you want to build a similar structure, portable return The Polaroid mini camera can be downloaded and assembled by youelf. The following will use the itallation itructio with emotico (this simple camera is not perfect, there are still many problems that need to be improved, and you need some patience and hands-on ability, any feedback and comments are welcome)
The fuselage engineering print file is currently divided into five parts as follows: BODY_down BODY_up Cold boots Reflective le cutting, refer to the plan view, thickness less than 2mm Print viewfinder (rough range) can also be mounted on other 75 focal length viewfinde of other 120 rangefinder 645 cameras
As far as fun is concerned, making the machine small might not be a good choice. Just as the original idea of Olympus's genius designer Yoshihisa Maitani provided the world with unique compact and exquisite PEN and OM film cameras. Today, even digital, PEN's digital cameras are still alive. Not to mention that there is no need to enlarge the film of the itant camera.
If you found this useful, please donate what you think it is worth to my . Help cover the time of design.
Thanks, Enjoy!
I look forward to seeing everyone build their own unique Polaroid mini
便攜3D打印改裝重造mini版本的彩虹拍立得機SK1
2016年的時候，曾利用寶麗來彩虹機的內膽改造過一臺折返結構的拍立得mini相機（原型機），體積小巧，巴掌大小，整體手感緊湊，非常便攜。雖然估焦，但可玩性較強。
很多朋友看了頗為感興趣，于是近期利用空閑時間，從新設計建模了工程3D文件，用LOMO的mini吐片后背和一臺性價比很高的柯尼卡 Pearl II 645相機從新打造一這臺命名為SK1的mini拍立得。
前后不斷修正完善，測試了多種版本，最終外形還是以體積小便攜為本。特別在此說明一下，柯尼卡Pearl II這臺645/120相機，其鏡頭組件本身為整組移動較為高級，鏡頭上有很方便的調焦旋鈕，鏡頭是柯尼卡本廠的hexar75/3.5，成像素質非常不錯，快門速度很完整很給力B\1\2\5\10\25\50\100\250\500,含有快門線插口，機器在二手市場上價格較便宜，很適合用做改造。改造的時候，只需要拆下其鏡頭即可。當然也可以使用其他的鏡頭快門組，但具體要自行嘗試。
機身3D工程文件在設計時考慮到普通FDM熔融擠壓式的3D打印機的特點，將其分解為上下兩個部分，提高打印成功率，建議使用ABS/或者工業纖維/尼龍等較為結實堅硬，熔點較高的材料，
這臺SK1mini拍立得，目前可以拍攝0.5-1.5米范圍內焦段行程，適合人像和小品，快門全手動，本次工程文件將提供百度網盤下載，如果想要建造一臺類似結構，便攜折返拍立得mini相機可以自行下載組裝，以下會以圖釋使用安裝說明（這臺簡易相機并不完美，還有很多問題需要完善，需要你有一定耐心和動手能力，歡迎任何反饋及留言）
機身工程打印文件目前分為5個部分如下： BODY_down BODY_up 冷靴 反射鏡片切割，參照平面圖，厚度2mm以內 打印取景器（范圍粗略）也可自行安裝其他120旁軸645相機的75焦段取景器
就趣味而言，把機器做小未嘗不是一種很好的選擇，正如奧林巴斯的天才設計師米谷美久Yoshihisa Maitani一開始所持的理念，為世界提供了獨特小巧精美的PEN和OM膠片相機，乃至數碼化的今天，PEN的數碼相機仍然健在。更何況不必放大底片的即顯即影相機。
期望看到大家自行組裝別具特色的拍立得mini
Portable 3D Printing Refit Mini Veion Rainbow Polaroid SK1
In 2016,I modified a Polaroid mini camera (prototype) with a folded-back structure was traformed by using the interior of the Polaroid Rainbow Machine. It has a small size, a palm-sized body, a compact overall feel, and is very portable. Although the focus is estimated, but the playability is strong.
Some like it, so I used the free time recently to model the engineering 3D file from the new design. I used LOMO's mini film back and a cost-effective Konica Pearl II 645 camera to create a new one. The mini Polaroid was named SK1.
It has been revised and improved before and after, and various veio have been tested. The final shape is still small and portable. In particular, here is the Konica Pearl II 645/120 camera. The le assembly itself is more advanced for the whole group. The le has a convenient focus knob. The le is Konica's own hexar75 / 3.5. , The imaging quality is very good, the shutter speed is very complete and very powerful B \ 1 \ 2 \ 5 \ 10 \ 25 \ 50 \ 100 \ 250 \ 500, including the shutter line socket, the machine is cheaper in the second-hand market, it is very suitable for use Makeover. When remodeling, just remove its le. Of coue, other le shutter groups can also be used, but you must try it youelf.
The design of the fuselage 3D engineering file takes into account the characteristics of ordinary FDM melt-extrusion 3D printe, and breaks it into upper and lower parts to improve the printing success rate. It is recommended to use ABS / or industrial fiber / nylon, etc. Higher melting materials,
This SK1mini Polaroid can currently shoot focal lengths in the range of 0.5-1.5 mete, suitable for portraits and sketches, and the shutter is fully manual. The project file will be provided for Baidu web disk download. If you want to build a similar structure, portable return The Polaroid mini camera can be downloaded and assembled by youelf. The following will use the itallation itructio with emotico (this simple camera is not perfect, there are still many problems that need to be improved, and you need some patience and hands-on ability, any feedback and comments are welcome)
The fuselage engineering print file is currently divided into five parts as follows: BODY_down BODY_up Cold boots Reflective le cutting, refer to the plan view, thickness less than 2mm Print viewfinder (rough range) can also be mounted on other 75 focal length viewfinde of other 120 rangefinder 645 cameras
As far as fun is concerned, making the machine small might not be a good choice. Just as the original idea of Olympus's genius designer Yoshihisa Maitani provided the world with unique compact and exquisite PEN and OM film cameras. Today, even digital, PEN's digital cameras are still alive. Not to mention that there is no need to enlarge the film of the itant camera.
If you found this useful, please donate what you think it is worth to my . Help cover the time of design.
Thanks, Enjoy!
I look forward to seeing everyone build their own unique Polaroid mini
便攜3D打印改裝重造mini版本的彩虹拍立得機SK1
2016年的時候，曾利用寶麗來彩虹機的內膽改造過一臺折返結構的拍立得mini相機（原型機），體積小巧，巴掌大小，整體手感緊湊，非常便攜。雖然估焦，但可玩性較強。
很多朋友看了頗為感興趣，于是近期利用空閑時間，從新設計建模了工程3D文件，用LOMO的mini吐片后背和一臺性價比很高的柯尼卡 Pearl II 645相機從新打造一這臺命名為SK1的mini拍立得。
前后不斷修正完善，測試了多種版本，最終外形還是以體積小便攜為本。特別在此說明一下，柯尼卡Pearl II這臺645/120相機，其鏡頭組件本身為整組移動較為高級，鏡頭上有很方便的調焦旋鈕，鏡頭是柯尼卡本廠的hexar75/3.5，成像素質非常不錯，快門速度很完整很給力B\1\2\5\10\25\50\100\250\500,含有快門線插口，機器在二手市場上價格較便宜，很適合用做改造。改造的時候，只需要拆下其鏡頭即可。當然也可以使用其他的鏡頭快門組，但具體要自行嘗試。
機身3D工程文件在設計時考慮到普通FDM熔融擠壓式的3D打印機的特點，將其分解為上下兩個部分，提高打印成功率，建議使用ABS/或者工業纖維/尼龍等較為結實堅硬，熔點較高的材料，
這臺SK1mini拍立得，目前可以拍攝0.5-1.5米范圍內焦段行程，適合人像和小品，快門全手動，本次工程文件將提供百度網盤下載，如果想要建造一臺類似結構，便攜折返拍立得mini相機可以自行下載組裝，以下會以圖釋使用安裝說明（這臺簡易相機并不完美，還有很多問題需要完善，需要你有一定耐心和動手能力，歡迎任何反饋及留言）
機身工程打印文件目前分為5個部分如下： BODY_down BODY_up 冷靴 反射鏡片切割，參照平面圖，厚度2mm以內 打印取景器（范圍粗略）也可自行安裝其他120旁軸645相機的75焦段取景器
就趣味而言，把機器做小未嘗不是一種很好的選擇，正如奧林巴斯的天才設計師米谷美久Yoshihisa Maitani一開始所持的理念，為世界提供了獨特小巧精美的PEN和OM膠片相機，乃至數碼化的今天，PEN的數碼相機仍然健在。更何況不必放大底片的即顯即影相機。
期望看到大家自行組裝別具特色的拍立得mini
|
共個文件
壓縮包大?。?MB
|
||
|---|---|---|
微信小程序
微信掃碼打開此模型
迪威模型
微信掃碼支付