關節章魚章魚球

本次作品是非常有趣的物件，章魚本身運用了不同顏色的線材列印，以原線材色來表現成品，
由於它是原色列印，不支撐不打磨因此也不會上色，且印完後就可以直接玩，不需要拆任何支撐材。
章魚列印的時候需要注意前幾層，一樣放慢一點有確保黏緊之後，幾乎是都能成功的，
原設計有放置一個檔案是用來支撐嘴巴的懸空小零件，因此不用開支撐可以更順利更美觀的完成。
由於看著看著就想到了章魚小丸子，於是突發奇想要來做章魚小丸子系列，運用SolidWorks簡易指令建模，
以及列印的經驗做拆件工序，這樣子就很容易列印了，並且利用塗裝厚來達到裝配需求，
正好補足縮水等問題導致的公差問題，完成後可以說是一個荒謬又有趣的作品。
This work is a very interesting object. The octopus itself is printed with different colo of wire, and the original wire color is used to represent the finished product.
Because it is printed in primary colo, it is not supported or polished, so it will not be colored, and it can be played directly after printing, without the need to remove any supporting materials.
When printing an octopus, you need to pay attention to the fit few laye. Slow it down a bit to eure that it is almost adhered.
In the original design, a file is placed to support the small hanging parts of the mouth, so it can be completed more smoothly and beautifully without opening the support.
As I looked at it, I thought of octopus balls, so I suddenly wanted to make a series of octopus balls, using simple itructio from SolidWorks to model,
And printing experience to do the disassembly process, so that it is easy to print, and use the coating thickness to meet assembly requirements,
Just to make up for the tolerance problems caused by shrinkage and other issues, it can be said to be an ridiculous and interesting work.