高強(qiáng)度棒夾安裝的LED燈-10瓦LED-12-32 v dc-650英尺光斑束

BCML-LEDP1X10WRE from Laon Electronics is a Bar Clamp Mount LED Spotlight that offe high light output in a durable, low profile housing. This light produces a very tight spot pattern, can run on any voltage from 12 to 32 volts DC and provides a rugged lighting solution ideal for use in marine environments, industrial and commercial applicatio, heavy equipment illumination, vehicle lighting and law BCML-LEDP-1X10WRE LED bar clamp mount LED spotlight from Laon Electronics produces a 650` long beam while drawing less than 1 amp on a 12 volt electrical system. A single 10 watt LED is combined with high purity optics to produce a tight 10 degree spread spot beam. This fixture is ideal for anyone who is looking for a tight spot light that offe an outstanding LED life expectancy of 50,000 LED bar clamp mount spotlights are IP68 rated and waterproof to three mete, sealed agait intrusion by dust and dirt and ruggedly cotructed to withstand demanding environments and applicatio. The housing of this hunting spotlight is cotructed of extruded aluminum and features rubber isolated mounts and unbreakable polycarbonate lees to provide durability and resistance to vibratio, impacts, abuse, hard rai, sand and high Benefits: Unlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation and/or traportation. Itead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current is applied, providing itant illumination with no warm up or cool down time before re-striking. Because there is no warm up period, this light can be cycled on and off with no reduction in lamp lights run at significantly cooler temperatures than traditional metal halide and high pressure sodium lights and contain no harmful gases, vapo, or mercury, making them both safer and more energy efficient. No extra energy is wasted in cooling enclosed work areas due to external heat emissio from bulb type lights, and the operator risks associated with traditional lighting methods, such as accidental bur and exposure to hazardous substances contained in the glass bulbs, are eliminated. In addition, LEDs are also safer for the environment as they are 100% recyclable, which eliminates the need for costly special disposal services required with traditional gas burning and arc type Management: Heat is the single largest factor in premature LED failure and color shifting. As a result, many manufacture reduce the output of their LEDs to reduce the amount of heat produced. These LED light ba utilize an extruded aluminum housing that incorporates an advanced heat radiating fin design which dissipates heat efficiently to produce the maximum amount of power and longevity. The end result is more light and longer LED life with higher average lumen maintenance after 50,000 e Control: These units are able to monitor and adjust input current to maintain the correct LED voltage levels regardless of input levels across a specific range. This BCML-LEDP1X10WRE can operate on current ranging from 12 to 32 Volts DC without any modificatio necessary as a result. This high output LED spotlight draws 0.84 amps @ 12V DC and 0.42 amps @ 24V DC. The multi-voltage capability makes these units ideal for mobile and standalone applicatio such as those found on commercial boats, heavy equipment and vehicles where power systems don`t always operate with 12 volts and external generato, traforme or inverte are lity: The BCML-LEDP1X10WRE offe IP68 rated cotruction that is designed to withstand tough environmental and operating conditio. These units can operate in temperatures ranging from -40 degrees Celsius to 85 degrees Celsius, are waterproof to three mete and resist ingress of dust, dirt and humidity. The housings are formed from die-cast aluminum and the lees are unbreakable : Each light comes with a detachable 16 foot coil cord with cigarette plug. The cord is detached via a weatherproof, 2 pin Deutsch connector which easily and securely attaches and detaches the coil cord from the spotlight. Other cords, including 21 foot cords with ring terminals (C-21RT), 16 foot cord with spring battery clamps (alligator clips) (C-16BC) and a 16 foot straight cord with cigarette plug (C-16CP) are available. This light can be ordered in either 12 volt or 24 volt configuration, allowing it to be used with any vehicle or ATV equipped with a cigarette plug. Choose voltage below when ion: Operator controls rotation and elevation of spotlight outside of vehicle by twisting and turning a handle. The beam remai where the operator places it until the handle is ng: The BCML-LEDP1X10WRE is mounted on the end of a 4" shaft chrome plated. An aluminum bar clamp is mounted to the shaft to simplify mounting. These bar clamps are not adjustable. The top portion of the mount has a through hole that enables the operator to pass one of two 1/4 - 20 bolts through it and secure that stud with a Nylock nut. The Nylock nut and bolt are provided with the bar clamp. Small machine screws secure the bottom half of the clamp to the top portion. The italler simply affixes the light to the top portion and places the assembly on the rail or bar. The bottom portion is positioned and secure with the machine screws, cinching the clamp tightly to the Sizes: The BCML-LEDP1X10WRE Bar Clamp LED Spotlight is available with various sized bar clamp mounts to accommodate different sized rails or ba. For example, if the rail you need to mount this spotlight on has an outside diameter of 1", you would choose the 1" size mount. The bar sizes that this mounting system can accommodate are as follows: 0.75", 1", 1.25", 1.5", 1.75", 2", 2.25", 2.5" or 2.75". Make your selection below when veatile mounting and high output adjustable light head make this spotlight ideal for hunting and offroad applicatio. Being both waterproof and resistant to impacts, vibration, and dusts this LED spotlight is well suited for ATVs, UTVs, 4-wheele, golf carts, and any other application with a post to mount the light Laon Electronics, we do more than meet your lighting needs. We also provide replacement, retrofit, and upgrade parts as well as industrial grade power accessories. Our craftsmen can custom build any lighting system and/or accessories to fit the unique demands of your operation. A commitment to honesty, quality, and dependability has made Laon Electronics a leader in the lighting and electronics business since 1973. Contact us today at 877-737-0586 or message sales@ for more information about our custom optio tailored to meet your specific industry needs.