TokyoMarui USP9全尺寸GBB的矢量光學支架

東京馬陸為usp9全尺寸gbb安裝Vector Optics。
為了最大限度地貼近幻燈片上部的形狀，我們設計了穩定的結構。
建模針對Vector Optics Frenzy 1x17x24 Pistol Red Dot Sight產品進行了優化。
模型數據分為后置站點部件和安裝部件。
首先在幻燈片上安裝后置站點，然后組裝安裝。
必須使用插入螺母才能安裝相應的輸出。
安裝螺母后，將其緩慢推入輸出物的孔中，然后冷卻，該螺母將固定在輸出物上。
如果固定不好，可在額外的螺母周圍涂上滾邊固定。
準備物
Iert nut M3x4x5mm x2
Iert nut M2x4x3.5mm x2
M3x8mm x2
M2x7mm x2
Vector Optics mount for Tokyo Marui usp 9 full size gbb.
It is designed with a stable structure so that it can adhere to the shape of the upper part of the slide as much as possible.
Modeling is optimized for Vector Optics Frenzy 1x17x24 Pistol Red Dot Sight products.
Model data is divided into rear sight parts and mount parts.
Itall the rear sight on the slide fit and assemble the mount.
Iert nut must be used to itall the corresponding printout.
After heating the iert nut, slowly push it into the hole of the printout and let it cool to fix the iert nut on the printout.
If it is not secured well, apply Loctite around the iert nut to fix it.
materials
Iert nut M3x4x5mm x2
Iert nut M2x4x3.5mm x2
M3x8mm x2
M2x7mm x2