圖片
迪威網(wǎng)友6457e7
免費，登錄即可下載
發(fā)布時間：2021/1/10 4:35:00
This is a six round veion of my other 38 Special/.357 Magnum Speed Loader.
This is a Work in Progress and was done on request so I can't test it peonally as to whether it fits (iert your revolver model here). The cylinder spacing dimeio for this were taken from a HKS 10 speed loader so if those work with your revolver there is a good chance this might too. (keyword being "Might".)
There are only three pieces to the speed loader and it is held together with a single 6/32 x1/2" button head screw. I tapped the center hole before ierting the screw but you might be able to just self thread it in.
You will have to sand the holes to allow the rounds to fit smoothly.
The lock has to be ierted correctly for it to work properly so a little trial and error is in order when assembling it. This one should unlock the rounds with a clockwise turn. The nubs on the lock may wear out after time but I haven't tested them that much yet.
I've also included a loading block for this but I haven't printed this one peonally so if you do and there are problems let me know.
11-20-19 = Added Loader Body 6 Round Flat (has not been printed/tested.)
03-28-20 = Added Speed Loader 6 Shot (which "should" work with custom knobs from my 5 shot veion)
If you have any questio or problems with the files or fitment of the parts just let me know and I will try to fix them.
Remember to tip your waite designe if you like the service.... thanks for looking
This is a Work in Progress and was done on request so I can't test it peonally as to whether it fits (iert your revolver model here). The cylinder spacing dimeio for this were taken from a HKS 10 speed loader so if those work with your revolver there is a good chance this might too. (keyword being "Might".)
There are only three pieces to the speed loader and it is held together with a single 6/32 x1/2" button head screw. I tapped the center hole before ierting the screw but you might be able to just self thread it in.
You will have to sand the holes to allow the rounds to fit smoothly.
The lock has to be ierted correctly for it to work properly so a little trial and error is in order when assembling it. This one should unlock the rounds with a clockwise turn. The nubs on the lock may wear out after time but I haven't tested them that much yet.
I've also included a loading block for this but I haven't printed this one peonally so if you do and there are problems let me know.
11-20-19 = Added Loader Body 6 Round Flat (has not been printed/tested.)
03-28-20 = Added Speed Loader 6 Shot (which "should" work with custom knobs from my 5 shot veion)
If you have any questio or problems with the files or fitment of the parts just let me know and I will try to fix them.
Remember to tip your waite designe if you like the service.... thanks for looking
|
共0個文件
壓縮包大?。?MB
|
||
|---|---|---|
微信小程序
微信掃碼打開此模型
迪威模型
微信掃碼支付