迪威網(wǎng)友cade31
發(fā)布時間：2021/1/16 16:50:00
Another cosmetic upgrade for the Everest Gen7, hood louve!
This was designed to mimic the decal on the hood exactly. Using a new hobby knife blade, slowly and carefully cut through the body, following the decal, about halfway between the edge and the louver design as seen in the pictures. Be extremely careful, it is super easy to slip and cut more of your body than you intend to, or scratch other areas. Please do not attempt this unless you are extremely confident AND willing to potentially ruin your body.
There is a little flange on the print where you can use a very small amount of superglue to hold the part in place.
Redcat parts on Thingivee are released under the Creative Commo Licee Attribution- NonCommercial- ShareAlike 4.0 International (CC BY-NC-SA 4.0).
We want to share these parts with the world, and we want to ipire people to make and share their own parts for their vehicles.
In keeping with the non-commercial clause of this licee, if you produce this part (Hood_Louve.stl) for othe, you may not receive compeation in excess of $0.25 per set, plus your shipping costs. This number is calculated based on an average estimate of material cost and machine running costs.
This was designed to mimic the decal on the hood exactly. Using a new hobby knife blade, slowly and carefully cut through the body, following the decal, about halfway between the edge and the louver design as seen in the pictures. Be extremely careful, it is super easy to slip and cut more of your body than you intend to, or scratch other areas. Please do not attempt this unless you are extremely confident AND willing to potentially ruin your body.
There is a little flange on the print where you can use a very small amount of superglue to hold the part in place.
Redcat parts on Thingivee are released under the Creative Commo Licee Attribution- NonCommercial- ShareAlike 4.0 International (CC BY-NC-SA 4.0).
We want to share these parts with the world, and we want to ipire people to make and share their own parts for their vehicles.
In keeping with the non-commercial clause of this licee, if you produce this part (Hood_Louve.stl) for othe, you may not receive compeation in excess of $0.25 per set, plus your shipping costs. This number is calculated based on an average estimate of material cost and machine running costs.
|
共個文件
壓縮包大?。?30KB
|
||
|---|---|---|
微信小程序
微信掃碼打開此模型
迪威模型
微信掃碼支付