帶觸摸面板操作的開門器

這是不直接接觸門把手和電梯按鈕就可以操作的器具。以簡單的形狀，重視容易持（有）設計了。
附著在物體上的日冕病毒在其表面存活了數小時。這些東西被稱為新型日冕的感染途徑之一。
可以操作到約35mm左右的桿。也有吸管孔，從脖子等處放下來就可以馬上使用。
這是不直接接觸門把手和電梯按鈕就可以操作的器具。以簡單的形狀，重視容易持（有）設計了。
附著在物體上的日冕病毒在其表面存活了數小時。這些東西被稱為新型日冕的感染途徑之一。
可以操作到約35mm左右的桿。也有吸管孔，從脖子等處放下來就可以馬上使用。
V2是支持電容式觸摸屏操作的版本。請將0.5mm左右的鋼絲，從前端的孔通過手指穿過孔的邊緣，穿過到打孔部分。然后，將M3的10mm螺絲旋入前端。如果反應不好的話，請在螺絲孔里填充少許鋁箔等。
It is a device for operating without directly touching the door knob or elevator butto. It has a simple shape and was designed with an emphasis on ease of holding.
Corona viruses that attach to objects survive on the surface for several hou. Those things are said to be one of the infection routes of the new corona.
You can operate the lever up to about 35 mm. There is also a strap hole, so you can use it immediately by lowering it from your neck.
V2 is a veion that supports capacitive touch panel operation. Pass a 0.5mm steel wire through the hole at the tip and through the edge of the hole to the strap hole. Then screw the M3 10mm screw into the tip. If it doesn't respond well, fill the screw holes with a little aluminum foil.