迪威網友56d65f
發(fā)布時間：2020/9/12 9:35:00
video
透過SolidWorks簡單的指令建立出來的檔案，其中已經考量了組裝及列印公差，因此列印完之後就可以使用，記得所有物件在列印的時候都不需要開支撐，特別是螺絲與螺帽不可以有支撐，列印速度只要不要太快都會很順利的。
你可以裝到一些輕型物件上面，使用範圍非常廣泛的，而且只要表面列印的好，用起來會非常非常滑順喔，有如安裝了軸承般滑順，喜歡的人可以去下載檔案來製作喔。
The file created through the simple commands of SolidWorks has coidered the assembly and printing tolerances, so it can be used after printing. Remember that all objects do not need to be supported when printing, especially screws and nuts. It can be supported, as long as the printing speed is not too fast, it will be smooth.
You can itall it on some light objects. It has a wide range of applicatio. As long as the surface is printed well, it will be very smooth to use. It is as smooth as a bearing. Those who like it can download the file to make it.
透過SolidWorks簡單的指令建立出來的檔案，其中已經考量了組裝及列印公差，因此列印完之後就可以使用，記得所有物件在列印的時候都不需要開支撐，特別是螺絲與螺帽不可以有支撐，列印速度只要不要太快都會很順利的。
你可以裝到一些輕型物件上面，使用範圍非常廣泛的，而且只要表面列印的好，用起來會非常非常滑順喔，有如安裝了軸承般滑順，喜歡的人可以去下載檔案來製作喔。
The file created through the simple commands of SolidWorks has coidered the assembly and printing tolerances, so it can be used after printing. Remember that all objects do not need to be supported when printing, especially screws and nuts. It can be supported, as long as the printing speed is not too fast, it will be smooth.
You can itall it on some light objects. It has a wide range of applicatio. As long as the surface is printed well, it will be very smooth to use. It is as smooth as a bearing. Those who like it can download the file to make it.
|
共個文件
壓縮包大?。?MB
|
||
|---|---|---|
微信小程序
微信掃碼打開此模型
迪威模型
微信掃碼支付