迪威網(wǎng)友8f71f9
發(fā)布時(shí)間：2021/1/28 13:30:00
If you like my work please coider followingubscribing to my feeds : Itagram and YouTube
Or you can support me via ko-fi
new : I'm roling out V2 veio of the frame. Some correctio for durability, slightly lighter.
You can buy PicklePick (V1 for now) from Armattan Productio (which brings me a small commission) :
PicklePick 65mm 4 hole moto or 3 hole moto
PicklePick 3 inch (V1) 4 hole moto or 3 hole moto
Or from these vendo :
PicklePick 3 inch RVS Edition from RotorVillage (CA/US)
PicklePick 3 inch from Taco-RC (HK/Worldwide)
For other optio including get the frame cut at your favorite CNC service check below.
The PicklePick is a new veion of my good old Pickle frame. It is still a Toothpick style frame so i tried to put together all the thinks i liked in this format and put up a nice line up of micro frames, from 2inch, 65mm/2.6inch to 3 inch.
Is this too small for you ? Check the PickleBig 4 and 5 inch variants based on this frame.
NEW : Added a 2 inch / 3 hole moto option. This one is intended for ultralight 2 inch setups
Frame Specificatio
The guidelines i tried to follow : simple, light & no compromises.
Open source design, get it cut at your favorite CNC Cutting service
2inch (1.5mm thick), 65mm (2.5mm thick) and 3 inch (3mm thick)
4 hole / 9mm motor mount (1103 up to 1408 i think)
NEW : 3 hole veion for Amax 1103 9mm and Happymodel 1102/1103 6.6mm mounts
Whoop AIO FC or 16x16 stack (except 2 inch)
weight should be :
~2.6g for the 2 inch
~5.5g for the 65mm
~7g for the 3 inch
That's all, no more USB cutout, no more univeal motor mount, no more TwistLock. The goal is to provide the best frame possible fitting the best components. As usual you tell me but fit feedbacks are really interesting.
How to get your PicklePick frame
Armattan Productio
PicklePick 65mm 3 hole moto
PicklePick 65mm 4 hole moto
PicklePick 3 inch 3 hole moto
PicklePick 3 inch 4 hole moto
RotorVillage
PicklePick 3 inch TrueX RVS Edition
Pickle Evo Deadcat 3 inch RVS Edition
Taco-RC
You can buy the PicklePick 3 inch 4 hole moto from Taco-RC
Make it cut (The DIY option)
As always you can use the DXF files and get it cut following your specs at any CNC service you like. Here are my recommendatio :
(US/CA, amazing quality & service)
(EU)
Get the dxf files and send them to the services mentioned above. I recommend you to ask for the following stuff :
2 inch : 1.5mm thick CF
65mm : 2.5mm thick CF with chamfered edges
3 inch : 3mm thick CF with chamfered edges
3D printable accessories for your build :
The PicklePod2 canopy
My various Toothpick style accessoires
Recommended gear & components
All the components below have been tested peonnaly and/or have positive feedbacks from trustworthy people in the micro community.
Toothpick best gear & parts
Moto for 65mm / 2S setup
BrotherHobby Returner R3 1103 8000 or 10000 Kv
Hyperlite Toothpick Motor 1103 / 8022 Kv
Skysta 1103 8000 or 11000 Kv
AmaxInno 1103 7500 Kv (4 hole veion only!!!)
GepRC Speedx GR1103 8000 or 10000 Kv
Diatone Mamba 1103 8500 or 10000 Kv
Moto for 3 inch / 3S setup
FPVCycle 1204 by Rcinpower (2mm shaft!)
Rcinpower GTS 1204 5000 Kv
Amaxinno 1303 4800 Kv (2mm shaft)FPVCycle Amaxinno
Diatone Mamba 1105 5500 Kv
3B Hobby 1105 6000 Kv
iFlight Xing Nano X1105 6000 Kv
Betafpv 1105 6000Kv
AmaxInno 1103 5000 Kv
Flight Controlle
AIO FCs (Whoop size, 26x26mm mount holes)
BetaFPV Toothpick F4 2-4S 12 A
NameLessRC AIO412T F411
NameLessRC AIO412 F4
BetaFPV F4 AIO 12A FC
GEPRC GEP-12A-F4
16x16mm stacks
iFlight Succex F4 V2, exists with vtx
Diatone Mamba F411, exists with vtx
FPV Cameras (standalone, 14x14 format)
Runcam Nano 2
RunCam Racer Nano
Foxeer Predator V4 Nano
Caddx EOS2
FPV Cameras (AIO)
AKKTek AIO-SA
Wolfwhoop P-1
VTX
TBS Unify Pro32 Nano 5G8
TBS Unify Pro Nano 5G8
HappyModel Diamond VTX DVR <- This one also have an onboard DVR
Eachine Nano VTX
Onboard DVR
HappyModel Diamond VTX DVR <- This one have also a VTX
RunCam Mini DVR
5.8 GHz Antennas
Lumenier Micro AXII Shorty
TBS Triumph Pro
Foxeer Lollipop 3
Propelle
HQProps 65mm
HQProps T65mm
HQProps T3x2 / 3 inch
Gemfan 3018 / 3 inch
5.8G VTX
TBS Crossfire Nano
Fky R-XSR
Fky XM
Extra Mounting hardware
3x M2 6-8mm steel screws
Credits & Aknowledgements
Kabab for the original recipe & toothpick principles, David Pearce for being a great peon and early adopter (and letting me use his build images :) ), FaebuFPV & David Clédon (Dave_C_FPV) for ideas and great design discussio and all the Pickle & Toothpicks/Micros use for being a great community. Kudos to Matthew Nguyen who pushes ultralight setups and is the guy behind the 2 inch design.
Or you can support me via ko-fi
new : I'm roling out V2 veio of the frame. Some correctio for durability, slightly lighter.
You can buy PicklePick (V1 for now) from Armattan Productio (which brings me a small commission) :
PicklePick 65mm 4 hole moto or 3 hole moto
PicklePick 3 inch (V1) 4 hole moto or 3 hole moto
Or from these vendo :
PicklePick 3 inch RVS Edition from RotorVillage (CA/US)
PicklePick 3 inch from Taco-RC (HK/Worldwide)
For other optio including get the frame cut at your favorite CNC service check below.
The PicklePick is a new veion of my good old Pickle frame. It is still a Toothpick style frame so i tried to put together all the thinks i liked in this format and put up a nice line up of micro frames, from 2inch, 65mm/2.6inch to 3 inch.
Is this too small for you ? Check the PickleBig 4 and 5 inch variants based on this frame.
NEW : Added a 2 inch / 3 hole moto option. This one is intended for ultralight 2 inch setups
Frame Specificatio
The guidelines i tried to follow : simple, light & no compromises.
Open source design, get it cut at your favorite CNC Cutting service
2inch (1.5mm thick), 65mm (2.5mm thick) and 3 inch (3mm thick)
4 hole / 9mm motor mount (1103 up to 1408 i think)
NEW : 3 hole veion for Amax 1103 9mm and Happymodel 1102/1103 6.6mm mounts
Whoop AIO FC or 16x16 stack (except 2 inch)
weight should be :
~2.6g for the 2 inch
~5.5g for the 65mm
~7g for the 3 inch
That's all, no more USB cutout, no more univeal motor mount, no more TwistLock. The goal is to provide the best frame possible fitting the best components. As usual you tell me but fit feedbacks are really interesting.
How to get your PicklePick frame
Armattan Productio
PicklePick 65mm 3 hole moto
PicklePick 65mm 4 hole moto
PicklePick 3 inch 3 hole moto
PicklePick 3 inch 4 hole moto
RotorVillage
PicklePick 3 inch TrueX RVS Edition
Pickle Evo Deadcat 3 inch RVS Edition
Taco-RC
You can buy the PicklePick 3 inch 4 hole moto from Taco-RC
Make it cut (The DIY option)
As always you can use the DXF files and get it cut following your specs at any CNC service you like. Here are my recommendatio :
(US/CA, amazing quality & service)
(EU)
Get the dxf files and send them to the services mentioned above. I recommend you to ask for the following stuff :
2 inch : 1.5mm thick CF
65mm : 2.5mm thick CF with chamfered edges
3 inch : 3mm thick CF with chamfered edges
3D printable accessories for your build :
The PicklePod2 canopy
My various Toothpick style accessoires
Recommended gear & components
All the components below have been tested peonnaly and/or have positive feedbacks from trustworthy people in the micro community.
Toothpick best gear & parts
Moto for 65mm / 2S setup
BrotherHobby Returner R3 1103 8000 or 10000 Kv
Hyperlite Toothpick Motor 1103 / 8022 Kv
Skysta 1103 8000 or 11000 Kv
AmaxInno 1103 7500 Kv (4 hole veion only!!!)
GepRC Speedx GR1103 8000 or 10000 Kv
Diatone Mamba 1103 8500 or 10000 Kv
Moto for 3 inch / 3S setup
FPVCycle 1204 by Rcinpower (2mm shaft!)
Rcinpower GTS 1204 5000 Kv
Amaxinno 1303 4800 Kv (2mm shaft)FPVCycle Amaxinno
Diatone Mamba 1105 5500 Kv
3B Hobby 1105 6000 Kv
iFlight Xing Nano X1105 6000 Kv
Betafpv 1105 6000Kv
AmaxInno 1103 5000 Kv
Flight Controlle
AIO FCs (Whoop size, 26x26mm mount holes)
BetaFPV Toothpick F4 2-4S 12 A
NameLessRC AIO412T F411
NameLessRC AIO412 F4
BetaFPV F4 AIO 12A FC
GEPRC GEP-12A-F4
16x16mm stacks
iFlight Succex F4 V2, exists with vtx
Diatone Mamba F411, exists with vtx
FPV Cameras (standalone, 14x14 format)
Runcam Nano 2
RunCam Racer Nano
Foxeer Predator V4 Nano
Caddx EOS2
FPV Cameras (AIO)
AKKTek AIO-SA
Wolfwhoop P-1
VTX
TBS Unify Pro32 Nano 5G8
TBS Unify Pro Nano 5G8
HappyModel Diamond VTX DVR <- This one also have an onboard DVR
Eachine Nano VTX
Onboard DVR
HappyModel Diamond VTX DVR <- This one have also a VTX
RunCam Mini DVR
5.8 GHz Antennas
Lumenier Micro AXII Shorty
TBS Triumph Pro
Foxeer Lollipop 3
Propelle
HQProps 65mm
HQProps T65mm
HQProps T3x2 / 3 inch
Gemfan 3018 / 3 inch
5.8G VTX
TBS Crossfire Nano
Fky R-XSR
Fky XM
Extra Mounting hardware
3x M2 6-8mm steel screws
Credits & Aknowledgements
Kabab for the original recipe & toothpick principles, David Pearce for being a great peon and early adopter (and letting me use his build images :) ), FaebuFPV & David Clédon (Dave_C_FPV) for ideas and great design discussio and all the Pickle & Toothpicks/Micros use for being a great community. Kudos to Matthew Nguyen who pushes ultralight setups and is the guy behind the 2 inch design.
|
共個(gè)文件
壓縮包大小：2MB
|
||
|---|---|---|
微信小程序
微信掃碼打開此模型
迪威模型
微信掃碼支付