迪威網友4701f9
發(fā)布時間：2020/12/28 4:28:00
用于橫向放置10英寸平板的薄平板支架
把10英寸的平板電腦帶出家門，為了在桌上使用，連平板電腦架也一起帶著很麻煩。于是制作了可以貼在平板上的薄型臺燈。
【組裝】
印刷4個零件，在內側的下陷處粘貼磁鐵和鐵板。
將零部件的突出部分組合成內側。
我為了防滑，在零件的主體1上貼了橡膠。我覺得這個不一定是必要的。
用雙面膠帶將身體4貼在書寫板上。我貼上了TPU制的軟皮。
【磁鐵】
因為分解了不需要的書寫板盒子，得到了φ15的薄型磁鐵，所以就挪用了。
【鐵板】
截取均價100的軟線鉤的貝羅，撕下保護膠帶類后使用。
【雙面膠帶】
一般的雙面膠是用粘接層夾住基礎材料的構造，但是在軟材料和表面不平整的東西上粘合的話強度不足。我使用了基礎材料也變成粘結層的膠帶。
【關于強度的注意事項】
因為把做得很薄放在心上，所以我覺得用力會損壞的。我覺得最好不要拿著臺燈吊掛平板電腦。
請上傳文件360。變更零部件長度時，各零部件的軸間距離之比必須為1:1:0.5:1.5。
I find it annoying to always carry a tablet stand with me to take my 10-inch tablet out of the house and use it on the table. So I created a thin stand that can be attached to a tablet.
[assembly]
Print the four parts and attach the magnet and iron plate to the inner dents.
Combine so that the bulge of the parts is on the iide.
I put rubber on the body1 to prevent slipping. I don't think this is absolutely necessary.
Attach body4 to the tablet with double-sided tape. I stuck it on a soft cover made of TPU.
[magnet]
When I disassembled the tablet case that was no longer needed, I got a thin magnet of φ15, so I used it.
[Iron plate]
I cut off the tongue of the cord hook of the one coin shop, peeled off the protective tapes, and used it.
[Double-sided tape]
General double-sided tape has a structure in which the base material is sandwiched between adhesive laye, but the strength is iufficient when adhering to soft materials or objects with uneven surfaces. I used a tape whose base material is also an adhesive layer.
[Precautio about strength]
Since I kept in mind to make it thin, I think that it will be damaged if strong force is applied. I think it is better not to hold the stand and hang the tablet.
I uploaded the file of Fusion 360, so please modify it. When changing the length of parts, the ratio of the distance between axes in each part must be 1:1:0.5:1.5.
把10英寸的平板電腦帶出家門，為了在桌上使用，連平板電腦架也一起帶著很麻煩。于是制作了可以貼在平板上的薄型臺燈。
【組裝】
印刷4個零件，在內側的下陷處粘貼磁鐵和鐵板。
將零部件的突出部分組合成內側。
我為了防滑，在零件的主體1上貼了橡膠。我覺得這個不一定是必要的。
用雙面膠帶將身體4貼在書寫板上。我貼上了TPU制的軟皮。
【磁鐵】
因為分解了不需要的書寫板盒子，得到了φ15的薄型磁鐵，所以就挪用了。
【鐵板】
截取均價100的軟線鉤的貝羅，撕下保護膠帶類后使用。
【雙面膠帶】
一般的雙面膠是用粘接層夾住基礎材料的構造，但是在軟材料和表面不平整的東西上粘合的話強度不足。我使用了基礎材料也變成粘結層的膠帶。
【關于強度的注意事項】
因為把做得很薄放在心上，所以我覺得用力會損壞的。我覺得最好不要拿著臺燈吊掛平板電腦。
請上傳文件360。變更零部件長度時，各零部件的軸間距離之比必須為1:1:0.5:1.5。
I find it annoying to always carry a tablet stand with me to take my 10-inch tablet out of the house and use it on the table. So I created a thin stand that can be attached to a tablet.
[assembly]
Print the four parts and attach the magnet and iron plate to the inner dents.
Combine so that the bulge of the parts is on the iide.
I put rubber on the body1 to prevent slipping. I don't think this is absolutely necessary.
Attach body4 to the tablet with double-sided tape. I stuck it on a soft cover made of TPU.
[magnet]
When I disassembled the tablet case that was no longer needed, I got a thin magnet of φ15, so I used it.
[Iron plate]
I cut off the tongue of the cord hook of the one coin shop, peeled off the protective tapes, and used it.
[Double-sided tape]
General double-sided tape has a structure in which the base material is sandwiched between adhesive laye, but the strength is iufficient when adhering to soft materials or objects with uneven surfaces. I used a tape whose base material is also an adhesive layer.
[Precautio about strength]
Since I kept in mind to make it thin, I think that it will be damaged if strong force is applied. I think it is better not to hold the stand and hang the tablet.
I uploaded the file of Fusion 360, so please modify it. When changing the length of parts, the ratio of the distance between axes in each part must be 1:1:0.5:1.5.
|
共個文件
壓縮包大小：1MB
|
||
|---|---|---|
微信小程序
微信掃碼打開此模型
迪威模型
微信掃碼支付