防爆噴漆室LED照明-可見光紅色組合-2ft 2燈-C1D1

in the USAThe Laon Electronics EPL-24-2L-LED-VISRED Explosion Proof LED Light Fixture with Visible and Blackout lamps is United States and Canada approved Class 1 Division 1 & 2 and Class 2 Division 1 and 2 for areas where flammable chemical/petrochemical vapo exist or have the potential to exist. This explosion proof LED light has a T6 temperature rating and carries a paint spray booth light certification, making it ideal for applicatio such as paint booths, oil rigs, offshore applicatio, petrochemical, manufacturing, chemical storage, water treatment cente, and food processing plants. This two foot, two lamp LED fixture is ideal for operato seeking a top quality explosion proof light that will reduce operating costs, improve lighting quality and reduce downtime incurred from frequent servicing intervals. The EPL-24-2L-LED-VISRED is equipped with Laon Electronics’ specially designed LED T-series bulbs, with one visible white LED lamp and one blackout red LED lamp. Each lamp has individual leads to be powered separately. Our LED-T series bulbs are visibly brighter than standard F17/T8's and have coistently surprised many of our custome with their unexpectedly high light output levels. This fixture carries a T6 temperature rating and is approved for Class I Division 1, Groups C and D, Class I, Division 2, Group A, B, C and D, and Class II, Division 1 and 2, Groups E, F and G environments where flammable or combustible gases, vapo, dusts, fibe, and flying exist or stand the potential to exist. This LED linear fixture is approved for use in confined spaces. Click here to read the NEC description for explosion proof and hazardous have eliminated the ballast box normally associated with explosion proof fluorescent fixtures which reduces overall weight and overall complexity of itallation. There is no ballast in this unit and the included LEDT8-24-V1 LED lamps have a 50,000 hour service life, both of which result in extreme efficiency and greatly reduced maintenance costs. These fluorescent LED lamps have internal drive, eliminating external power components. The solid state design of the LED lamps give this fixture superior resistance to damage from vibration, extremes in temperature and a lamp service life over twice that of standard fluorescent bulbs. This second generation lamp is offered in 5600K cool white for the visible lamp and 600-675nm wavelength red for the blackout the glass tube design of traditional fluorescent lamps, these LED T-Style lamps have no filaments or fragile housings to break during operation. Itead of using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current applied and emitting light. The LED assembly is mounted to the "tube" cotructed from extruded aluminum, with a polycarbonate le protecting the LEDs. With LED lights, there is no warm up time or cool down time before re-striking and provide itant illumination when powered on, adding to the reliability of LED technology. By nature, LED light sources run significantly cooler than fluorescent lamps, reducing the chance of accidental bur and increased temperatures due to heat emissio. This solid state design of light emitting diodes provides a more reliable, stable, durable, and energy efficient light source over traditional fluorescent lighting. The 14 watt LED lamps produce 30% more illumination than standard T8 bulbs while offering lower amp draw and increased reliability. The visible white lamp produces 1,750 lume at 125 lume per watt. An EPL-24-2L-T8 explosion proof fluorescent light, with a combined total of 34 watts, draws 0.29 amps at 120 volts AC. This LED veion of the same light, with a total of 28 watts, draws only 0.23 amps at 120 volts AC. The EPL-48-2L-LED is univeal voltage, not multi-tap, and operates on any voltage from 120V to 277V AC 50/60hz without any modificatio. We also make a 12/24V AC/DC veion for low voltage applicatio for AC or DC EPL-24-2L-LED-VISRED LED light fixture is U.S. and Canada approved for use in paint spray booths. Please note, according to the NEC, using threaded rigid pipe does not require additional seal offs with this fixture. An EYM and seal off is necessary for flex conduit or other non-rigid pipe implementatio. Mounting Optio:Unless otherwise specified, our standard, most popular configuration is the bracket end mounting shown enlarged below. We also offer a pendant mount for those needing to suspend the fixture away from the ceiling surface (i.e. suspend from pipe or conduit). Additional mounting configuratio can be customized to meet the requirements on the application. Please contact us for special mounting able Surface Mount Brackets: Each bracket is cinched to the bracket mounting peg on each side of the light. The angle of the bracket is set by tightening two cap screws on either side of the bracket. The cap screws act as a set screw. The bracket itself is mounted via a single bolt hole at the top the bracket. There are two brackets, one on each end of the light. Once the brackets are mounted to a surface (ceiling, floor or wall), the light fixture can be removed from the brackets by loosening the cap screws that hold the bracket to the mounting peg. Suspeion Mounting: Pendant mount fixtures hang from the ceiling and are suspended by rigid pipe. Each fixture features a 1/2” NPT junction box on one end, and a 1/2” NPT adjustable L-bracket on the other end of the fixture. Operato bring rigid pipe down to the threaded mounting hubs. Wiring is fed down through the rigid pipe to the junction box and tied in to the fixture’s lead wires, completing the electrical connection. The adjustable L-shape mounting bracket provides support for the opposite end of the fixture. Suggested Applicatio:Paint spray booths, aircraft maintenance, oil drilling rigs, refineries, solvent and cleaning areas, gas processing plants, chemical manufacturing, waste treatment plants, gas processing plants.