迪威網友9b3e1d
發(fā)布時間：2021/2/3 22:20:00
Hello guys and girls.
This is a light up Yoda lamp or night light it uses my USB light which you need to print and download from
Follow the itructio there to create the light.
I used a green led for mine and a 200 ohm resistor.
If you don't have the skills needed to make the light I also designed it to work with one of these candles from :
I recommend working out the print settings youelf,
I created several using various techniques with simplify 3D including vase mode and 0% infill with 3 outer perimete. Both work well but vase mode is a little tricky and leaves the part very fragile, as such I recommend using 0% infill and at least 3 outer shells.
Revision
I added the file Yoda Ebay as there seems to be some slight deviation with the size of the Ebay candles and some may be a little tight. I made it 1mm bigger to be sure.
Disclaimer
I did not create the Yoda texture, I simply remodeled it from Adam Beamish's original model.
This is a light up Yoda lamp or night light it uses my USB light which you need to print and download from
Follow the itructio there to create the light.
I used a green led for mine and a 200 ohm resistor.
If you don't have the skills needed to make the light I also designed it to work with one of these candles from :
I recommend working out the print settings youelf,
I created several using various techniques with simplify 3D including vase mode and 0% infill with 3 outer perimete. Both work well but vase mode is a little tricky and leaves the part very fragile, as such I recommend using 0% infill and at least 3 outer shells.
Revision
I added the file Yoda Ebay as there seems to be some slight deviation with the size of the Ebay candles and some may be a little tight. I made it 1mm bigger to be sure.
Disclaimer
I did not create the Yoda texture, I simply remodeled it from Adam Beamish's original model.
|
共個文件
壓縮包大?。?MB
|
||
|---|---|---|
微信小程序
微信掃碼打開此模型
迪威模型
微信掃碼支付