迪威網友46b4ce
發布時間：2021/1/23 3:24:00
Hi Everyone!
Contained within this thing is a fully functional trolling/jigging fishing rod and reel. This work is a collaborative artwork between Lauren Prado (Itagram: @Findinglolo) and myself Josh Hughes (Itagram: @JoshuaHughesArtist). This fishing rod and reel was tested while we worked collaboratively at Caldera Artist Residency in Siste, Oregon.
It was our goal to create an avenue for new ideas in relation to ownehip, creation, remix culture, and popular coumer society, by asking one simple yet important question: What happe when coumer objects such as a fishpole, an artwork or a lure become nothing more than data, and that data is shared around the world for free?
The pole itself in this example is printed in Photo-Pasta Carbon Fiber HTPLA, and assembled with Loctite Professional Super Glue (another good glue to use would be a 2 part epoxy resin if you have the time to allow it to cure over night).
The reel:
What you will need to assemble the reel:
10 x Machine Screws with Nuts
5 x 7mm x 16mm Standard Skateboard Bearings
1 x 1mm x 3mm Hobby Brass Rod
(assembly video to be posted soon.)
I have also attached a .step and .iges for anyone wanting to improve this design.
Contained within this thing is a fully functional trolling/jigging fishing rod and reel. This work is a collaborative artwork between Lauren Prado (Itagram: @Findinglolo) and myself Josh Hughes (Itagram: @JoshuaHughesArtist). This fishing rod and reel was tested while we worked collaboratively at Caldera Artist Residency in Siste, Oregon.
It was our goal to create an avenue for new ideas in relation to ownehip, creation, remix culture, and popular coumer society, by asking one simple yet important question: What happe when coumer objects such as a fishpole, an artwork or a lure become nothing more than data, and that data is shared around the world for free?
The pole itself in this example is printed in Photo-Pasta Carbon Fiber HTPLA, and assembled with Loctite Professional Super Glue (another good glue to use would be a 2 part epoxy resin if you have the time to allow it to cure over night).
The reel:
What you will need to assemble the reel:
10 x Machine Screws with Nuts
5 x 7mm x 16mm Standard Skateboard Bearings
1 x 1mm x 3mm Hobby Brass Rod
(assembly video to be posted soon.)
I have also attached a .step and .iges for anyone wanting to improve this design.
|
共個文件
壓縮包大?。?MB
|
||
|---|---|---|
微信小程序
微信掃碼打開此模型
迪威模型
微信掃碼支付