迪威網友41d272
發布時間：2020/12/19 8:08:00
So I fell in live with this artwork by KohLJ
And started making a printable figure for tabletop.
He stands on a 50mm diameter base, and the character should be scaled for 28mm gaming (he's tall (approx 48mm) but he's special.
started in october, and built it with bitz from here and there, from many characte3d models that i cut and remixed and resculpted.
some parts were completely created from scratch (lance, shoulderpads, pelt robes, crown, armour details...)
I want to thank all you guys from the 40k make discord for your support, special thumbs up to Valandar for the flames sculpting tips.
The wings from xiaoxunyue2016 are just wonderful and fit perfectly for this glorious boy. I just had to make the missing parts that was cut.
Once again i did all the job in Meshmixer. I learned many techniques along the process, so everything is not perfect but heh it's a free model.
I probably forgot to quote some source models, but there are so many different ones i can't remenber.
I printed a prototype in FDM (0.25mm nozzle and 0.08mm laye), it works; wings are printing at the moment...
Future updates :
wings without cherubs ---> done
classic boots (no bird toes) ---> done
no mask with angelic face
no mask with serious face
22/12/2019 : added a bare face veion, with and without tiara (smaller head veion)
18/12/2018 : Updated the body with a smaller head
19/12/2018 : added a split veion for wings (with and without cherubs) and empty hands for customization purposes
28/12/2018 : added a right hand equipped with a shield
07/01/2019 : added a veion of legs with regular boots
NOTE : the armour parts will be probably updated early 2019, in order to look much more bulky, like a power armour should be
Glory to the emperor and may the "angel" rest in peace.
if you print it, share a make; if you like it and wish to support me, send a tip ;)
Check our Patreon : The Make Cult
== Please coider sending tips if you like my printable models ==
Copyright infringement is not intended. Parts are created freehand in 3d modeling software, no copyrighted product had been scanned or copied in any way. These models are for peonal use as proxies and should never be sold. If it causes copyright issues, i will remove it.
And started making a printable figure for tabletop.
He stands on a 50mm diameter base, and the character should be scaled for 28mm gaming (he's tall (approx 48mm) but he's special.
started in october, and built it with bitz from here and there, from many characte3d models that i cut and remixed and resculpted.
some parts were completely created from scratch (lance, shoulderpads, pelt robes, crown, armour details...)
I want to thank all you guys from the 40k make discord for your support, special thumbs up to Valandar for the flames sculpting tips.
The wings from xiaoxunyue2016 are just wonderful and fit perfectly for this glorious boy. I just had to make the missing parts that was cut.
Once again i did all the job in Meshmixer. I learned many techniques along the process, so everything is not perfect but heh it's a free model.
I probably forgot to quote some source models, but there are so many different ones i can't remenber.
I printed a prototype in FDM (0.25mm nozzle and 0.08mm laye), it works; wings are printing at the moment...
Future updates :
wings without cherubs ---> done
classic boots (no bird toes) ---> done
no mask with angelic face
no mask with serious face
22/12/2019 : added a bare face veion, with and without tiara (smaller head veion)
18/12/2018 : Updated the body with a smaller head
19/12/2018 : added a split veion for wings (with and without cherubs) and empty hands for customization purposes
28/12/2018 : added a right hand equipped with a shield
07/01/2019 : added a veion of legs with regular boots
NOTE : the armour parts will be probably updated early 2019, in order to look much more bulky, like a power armour should be
Glory to the emperor and may the "angel" rest in peace.
if you print it, share a make; if you like it and wish to support me, send a tip ;)
Check our Patreon : The Make Cult
== Please coider sending tips if you like my printable models ==
Copyright infringement is not intended. Parts are created freehand in 3d modeling software, no copyrighted product had been scanned or copied in any way. These models are for peonal use as proxies and should never be sold. If it causes copyright issues, i will remove it.
|
共個文件
壓縮包大?。?44MB
|
||
|---|---|---|
微信小程序
微信掃碼打開此模型
迪威模型
微信掃碼支付