迪威網(wǎng)友101dd4
發(fā)布時間：2021/2/12 6:11:00
The Pivotrack mounting solution was originally designed for the excellent $60 Tracks headphones from AIAIAI: -- The Tracks are well-suited to customization.
EDIT: There is now a Pivotrack adapter for use with the Koss Porta Pro headphones, designed primarily by "Zarbuta." Please find his post in the comments section for the adapter file and more details on printing.
See the videos for an idea of the setup process, then ease of use.
Features:
Lightweight
Easy to assemble
Gentle on your straps! These mounting clips are very low-risk in terms of potential damage to the Quest head straps.
Convenient: The arm locks into two rotatio: vertical for listening, or 45 degrees forward to stow while you don or remove the headset.
Vertical adjustability, which is inherent to the AIAIAI Tracks headphones.
Clean cable management via channels behind each clip.
Optional cable channels in the arms. Useful if you choose to mount the Tracks headphones with their cable pointing down itead of up, i.e. in order to use the inbuilt mic.
The existing parts are finished desig. However, for the future it is worth noting:
The arms have snap joint sockets to accommodate potential future add-o, such as a microphone mount (the Tracks have one built into the cable) or perhaps something more aesthetically-minded.
I am coidering building a polished, 3D-printed solution for cable management, probably mounted at the 3-way cross-section of the head strap. Will probably get around to this in the near future.
Not sure how well this design will fit everyone's ea. I've only been able to test on myself, and while the mounts do permit some degree of vertical speaker adjustment, it is a bit limited.
Setup:
Usage:
EDIT: There is now a Pivotrack adapter for use with the Koss Porta Pro headphones, designed primarily by "Zarbuta." Please find his post in the comments section for the adapter file and more details on printing.
See the videos for an idea of the setup process, then ease of use.
Features:
Lightweight
Easy to assemble
Gentle on your straps! These mounting clips are very low-risk in terms of potential damage to the Quest head straps.
Convenient: The arm locks into two rotatio: vertical for listening, or 45 degrees forward to stow while you don or remove the headset.
Vertical adjustability, which is inherent to the AIAIAI Tracks headphones.
Clean cable management via channels behind each clip.
Optional cable channels in the arms. Useful if you choose to mount the Tracks headphones with their cable pointing down itead of up, i.e. in order to use the inbuilt mic.
The existing parts are finished desig. However, for the future it is worth noting:
The arms have snap joint sockets to accommodate potential future add-o, such as a microphone mount (the Tracks have one built into the cable) or perhaps something more aesthetically-minded.
I am coidering building a polished, 3D-printed solution for cable management, probably mounted at the 3-way cross-section of the head strap. Will probably get around to this in the near future.
Not sure how well this design will fit everyone's ea. I've only been able to test on myself, and while the mounts do permit some degree of vertical speaker adjustment, it is a bit limited.
Setup:
Usage:
|
共個文件
壓縮包大?。?86KB
|
||
|---|---|---|
微信小程序
微信掃碼打開此模型
迪威模型
微信掃碼支付