Gopro汽車-Gopro汽車山支架

Gopro汽車支架，把它放在后座的后座，后座的后座。這一由七個部件組成的支架將主部件與鉤上的望遠鏡部件連接在一起，首先將硅膠內襯（以下描述）放在它身上，以防滑倒，然后放在頭部的支架上，最后用螺絲和螺母進行調整。遙測裝置與主部件相連，并通過螺栓進行調整（對兩個螺栓都包括一個可進行手動調整的適配器），最后一個放在Gopro攝像機上的第1-2件與遙測裝置相連，這兩個部件都通過螺栓進行調整。
該支架可調整到不同的量度，在頭部支架上，連續的相容直徑為11-12-13-14毫米，并可調整到46毫米。
下面的出版物顯示了為完成Gopro支持所需的最大和錨定分量及物體。
GoPro Support for the Car，it is placed in the supports of the headers of the passenger support coists of seven pieces，which are linked as follows，the main piece and the telecomic hook piece，the silicone stops are placed fit（description below）so that they do not slide and then are placed in the supports of the head supports that are finished adjusting with screw and nut；the telecomic part is linked to the main part partAnd is adjuste by a mea of a screw（for both screws an adapter is included to be able to adjust it by hand）and finally part 1-2 that where the gopro camera is placed，are linked with the telecopic part，both parts 1-2 are adjuste by mean of a thread.
這種支持可采取不同的措施，如支持可兼容的鉆石首飾，可作為11-12-13-14毫米的替代品，并可用于調整這一點，使之達到46毫米的范圍。
The publication below shows the maximum and minimum anchor dimeio of the support and the objects that must be taken to complete the goPro support.
https：