星球大戰 D-O 機器人 （動態構建）

My Star Wa D-O droid build designed to fit Ender 3 (23x23x25cm) size printbeds.
It's still in the Beta stage. The wheel and side panels are OK but some internal mechanics may be changed in a few days. I will update these files frequently.
Special thanks for DavidOx21. I've used his files as a template.
If you are planning a static build, I'm strongly recommending his work.
For more information please join our Facebook group
NOTES
tire_ring_left.STL >>> file is also the Right ring. I didnt draw another ring for the right side.
tire_bumps.STL >>> print 2pcs for the both sides.
Sand paper, 3mm and 6mm Drill bits required due to tight references.
You can use CA glue to attach tire rings, bumps and big gear to the structure.
BOM List
2x MG14 mini servos
2x Mini Digital Servo (for the head)
6x 3x3x6mm bearings(inner diameter, width,outer diameter)
6x 3x4x10mm bearings with flange.
50x M3 8mm dome head hex screws.
3mm carbon fibre rod (at least 300mm)
FILE UPDATE SUMMARY
UPDATE (15-05-2019)
Updated
Back Plate Head_Thin.STL Updated
UPDATE (5-05-2019)
Axle_90.STL Updated
head_counterweight.STL Updated
UPDATE (5-05-2019)
pan_tilt_1.STL Added
pan_tilt_2.STL Added
pan_tilt_3.STL Added
box_ankle.STL Added
Head_Grill.stl Added
Back_Plate_Head_Thin.STL Added
Updated and name changed from Box_out.stl
Fit Upload (28-04-2019)
VIDEOS (Please Subscribe)