迪威網(wǎng)友4fae7b
發(fā)布時間：2020/2/26 9:04:00
2/14/2020 Bed Two with switch cover added
2/14/2020 Axis cover V9 (Larger 3.8mm holes allow for a less perfect print)
Fit and fore most I must thank Gnizten for his brilliance, he came
up with the hot-end setup and without him the Plus setup never happe. I just ended being the one with the free time.
I moved the chain from the back to the bottom to reduce links and weight, will add the old double bracket to the package soon for those who may want it.
On the axis cover veion 8, the bottom beam and three small colum where the belt comes through are to be cut and removed. If you got veion 6 you will need to cut all the colum, if you got veion 7 its garbage, sorry.
For those having trouble printing chain don't give up, here's some tips.
Print small batches of 5-6.
Temperature of filament is critical for getting pretty links.
Reduce fan if environment is cold.
Print at 30-40mm speed.
Only use PLA , prints better and isn't brittle.
Use the Cura settings for all ende, ignore Gcode :
Follow me here
Uses Johnniewhiskey Ender 3 chain
To be used with the following,
Chain and cove
28 links X
36 links Y
15 links bed
Screws
6- M5x12, side bracket will need washe or M5x10. M5x10 may work in other areas.
1- M3x16
Holes for 4" zip-ties
2/14/2020 Axis cover V9 (Larger 3.8mm holes allow for a less perfect print)
Fit and fore most I must thank Gnizten for his brilliance, he came
up with the hot-end setup and without him the Plus setup never happe. I just ended being the one with the free time.
I moved the chain from the back to the bottom to reduce links and weight, will add the old double bracket to the package soon for those who may want it.
On the axis cover veion 8, the bottom beam and three small colum where the belt comes through are to be cut and removed. If you got veion 6 you will need to cut all the colum, if you got veion 7 its garbage, sorry.
For those having trouble printing chain don't give up, here's some tips.
Print small batches of 5-6.
Temperature of filament is critical for getting pretty links.
Reduce fan if environment is cold.
Print at 30-40mm speed.
Only use PLA , prints better and isn't brittle.
Use the Cura settings for all ende, ignore Gcode :
Follow me here
Uses Johnniewhiskey Ender 3 chain
To be used with the following,
Chain and cove
28 links X
36 links Y
15 links bed
Screws
6- M5x12, side bracket will need washe or M5x10. M5x10 may work in other areas.
1- M3x16
Holes for 4" zip-ties
|
共個文件
壓縮包大?。?MB
|
||
|---|---|---|
微信小程序
微信掃碼打開此模型
迪威模型
微信掃碼支付