迪威網友f6cc58
原創模型
Artillery X1 ImprovementImprovements 3-1st Layer Marlin Aided Leveling-Equality assistance 10P
發布時間：2020/3/1 6:29:00
Https：7lpgvlnheu
理事會
有一層輔助平衡功能的馬林
我們?cè)谟眯逼潞捅∧さ於ù呕倪^程中，在Z級增加了許多誤差容忍度，因此我們承諾在第一層實現完美的粘合和統一，即：
A.原床厚度的一致性
B.鋁制底盤螺絲和碼頭的整套調整
（c）軸承和支撐床架的軸承的剛性調整
D.與X軸有關的位置，從床上沿Y軸移動
E.噴口的Z平面位置，沿X軸移動
F-軸承向X軸調整的剛性支撐擠壓器
D.磁層厚度及其粘貼膠片的一致性
（e）薄膜和膠片的一致性
G.加速擠壓和流離失所
H.外部材料流動的一致性
F.導致膨脹的效果，溫度控制的效果，尤其是前一組的效果
等（不睡覺）
馬林原裝機在X1 Artillery中提供的平滑功能可能還不夠。
這一改進有助于保持傳統的平整功能，并增加一層平整功能，包括若干控制點，而不必對電子設備作任何改動或添加，這是一種替代辦法，可供在安裝一個BL Touch之前認真考慮。
所有這些硬件更新都是基于YouTube EZY3D實驗室頻道所做的出色工作。
我只需要改變一個馬林的參數，它應該是0.22的值，相當于原裝的西邊X1大炮的極限值，EZY3D的0.00的值，是為另一個安裝在他的大炮上的擠壓器而改裝的。
我不知道EZY3D U LAB的工作是原創的還是以馬林社區為基礎的，問題是EZY3D LAB有免費下載這一軟件的鏈接，如果我們想要它的倡議，它為我們提供了經濟支持的機會。
向凱撒獻上凱撒的圣物
English
Artillery X1 with Marlin 1st level aided leveling function
由于意大利有一個磁場基地，有Strip和Pei Layer，我們?cè)赯一級增加了許多容忍誤差的水平，因此我們承諾在第一層有完善的粘合劑和標準化：
A-The thickness uniformity of the original bed
B-The adjustment Assembly with Screws and Springs to the Aluminum Frame
C-The僵硬of adjustment of the Y-Axis bearings that support the bed frame
D-The position relative to the X xis of the Bed moving along the and axis
E-The position relative to the plan Z，of the nozzle，moving along the x xis
F-The hardity of adjustment of the X-Axis bearings that support the extruder
D.磁性激光器及其粘合劑膠片特性的統一性
E-The uniformity of the pei layer and its adhesive film
G-Extrusion Acceleratio and Displacements
H-變換絕緣材料的統一性
effect translated into extension of the PID temperature control over the entire previous set
……等（不到睡眠：）
The leveling function offered originally by the Marlin firmware on the artillery X1 may not be sufficient.
This improvement allows maintaining the classic leveling function and adding a leveling function of the 1st layer with several control points and without the need to make modificatio or additio in the electronics，it is an alternative to take into account，before coidering italling a bl touch
所有這些簽名最新資料都由YouTube頻道EZY3D實驗室提供。
I only had to change a marlin lin@advance@u k parameter that should have the value 0.22 that corresponds to the original artillery sidewer x1 extruder，the 0.00 value given by EZY3D@U lab was modified for another extruder that he had mounted on his artillery.
I do not know if the work of EZY3D@ULAB is original or if it is supported by the Marlin Community，the fact is that EZY3D LAB has download links for this firmware for free and in which it offer us the opportunity to support financially if we wish your initiative
《凱撒：凱撒是什么》？
download links needed to make the improvements：
改進所需的文件下載鏈接：
Artillery Sidewender X1 Firmware:Marlin MKS Firmware-Assisted 1st Layer Leveling-Alternative to Bl Touch
Firmware artillery sidewender X1:firmware Marlin MKS-equality 1 capacity assistance-Alternative to BL Touch iz
Artillery Sidewender X1 Firmware:TFT32 Firmware-Assisted 1st Layer Leveling-Alternative to Bl Touch
Firmware artillery sidewender X1:Firmware TFT32-Equality 10P assistance-Alternative to BL Touch
Template files blender 2.81，STL，GCODE and simplify3d for 1st layer leveling test
表格式文件BLENDER 2.81，STL，GCODE和簡化FY3D用于1 capahttp的平滑測試：比特.ly/2fmewc9
X1 magnetic base with strap and pei layer pre-italled（31x31mm）
X1帶有彎曲和預意大利薄膜的磁基（310x31mm）
to reference videos used to support the improvements presented：
支持所提交的改進的參考視頻鏈接：
通道EZY3D@ULAB and original manual leveling work 1st layer in artillery X1
EZY3D頻道和原平滑工作一層手動平滑手冊X1http：
Wham Bam Systems Channel with detailed explanation of itallation and maintenance of magnetic base，strapping and pei
WHAM Bam Systems頻道，詳細解釋了意大利和磁基維修，F(xiàn)lege和Peicht：比特.ly/36kirzx
Jose A3D Channel used for revision configuration TMC2100 drive in artillery x1
Jose A3D頻道用于在Artillery X1 TMC2100進行修改
用于修改配置的三位一體通道TMC2100 Drive in Artillery X1
micmc運河，用于改裝Drive TMC2100，Artillery X1
Teaching tech channel used for revision transformation TMC2100 drive in artillery x1
用于修改傳動TMC2100在Artillery X1
理事會
有一層輔助平衡功能的馬林
我們?cè)谟眯逼潞捅∧さ於ù呕倪^程中，在Z級增加了許多誤差容忍度，因此我們承諾在第一層實現完美的粘合和統一，即：
A.原床厚度的一致性
B.鋁制底盤螺絲和碼頭的整套調整
（c）軸承和支撐床架的軸承的剛性調整
D.與X軸有關的位置，從床上沿Y軸移動
E.噴口的Z平面位置，沿X軸移動
F-軸承向X軸調整的剛性支撐擠壓器
D.磁層厚度及其粘貼膠片的一致性
（e）薄膜和膠片的一致性
G.加速擠壓和流離失所
H.外部材料流動的一致性
F.導致膨脹的效果，溫度控制的效果，尤其是前一組的效果
等（不睡覺）
馬林原裝機在X1 Artillery中提供的平滑功能可能還不夠。
這一改進有助于保持傳統的平整功能，并增加一層平整功能，包括若干控制點，而不必對電子設備作任何改動或添加，這是一種替代辦法，可供在安裝一個BL Touch之前認真考慮。
所有這些硬件更新都是基于YouTube EZY3D實驗室頻道所做的出色工作。
我只需要改變一個馬林的參數，它應該是0.22的值，相當于原裝的西邊X1大炮的極限值，EZY3D的0.00的值，是為另一個安裝在他的大炮上的擠壓器而改裝的。
我不知道EZY3D U LAB的工作是原創的還是以馬林社區為基礎的，問題是EZY3D LAB有免費下載這一軟件的鏈接，如果我們想要它的倡議，它為我們提供了經濟支持的機會。
向凱撒獻上凱撒的圣物
English
Artillery X1 with Marlin 1st level aided leveling function
由于意大利有一個磁場基地，有Strip和Pei Layer，我們?cè)赯一級增加了許多容忍誤差的水平，因此我們承諾在第一層有完善的粘合劑和標準化：
A-The thickness uniformity of the original bed
B-The adjustment Assembly with Screws and Springs to the Aluminum Frame
C-The僵硬of adjustment of the Y-Axis bearings that support the bed frame
D-The position relative to the X xis of the Bed moving along the and axis
E-The position relative to the plan Z，of the nozzle，moving along the x xis
F-The hardity of adjustment of the X-Axis bearings that support the extruder
D.磁性激光器及其粘合劑膠片特性的統一性
E-The uniformity of the pei layer and its adhesive film
G-Extrusion Acceleratio and Displacements
H-變換絕緣材料的統一性
effect translated into extension of the PID temperature control over the entire previous set
……等（不到睡眠：）
The leveling function offered originally by the Marlin firmware on the artillery X1 may not be sufficient.
This improvement allows maintaining the classic leveling function and adding a leveling function of the 1st layer with several control points and without the need to make modificatio or additio in the electronics，it is an alternative to take into account，before coidering italling a bl touch
所有這些簽名最新資料都由YouTube頻道EZY3D實驗室提供。
I only had to change a marlin lin@advance@u k parameter that should have the value 0.22 that corresponds to the original artillery sidewer x1 extruder，the 0.00 value given by EZY3D@U lab was modified for another extruder that he had mounted on his artillery.
I do not know if the work of EZY3D@ULAB is original or if it is supported by the Marlin Community，the fact is that EZY3D LAB has download links for this firmware for free and in which it offer us the opportunity to support financially if we wish your initiative
《凱撒：凱撒是什么》？
download links needed to make the improvements：
改進所需的文件下載鏈接：
Artillery Sidewender X1 Firmware:Marlin MKS Firmware-Assisted 1st Layer Leveling-Alternative to Bl Touch
Firmware artillery sidewender X1:firmware Marlin MKS-equality 1 capacity assistance-Alternative to BL Touch iz
Artillery Sidewender X1 Firmware:TFT32 Firmware-Assisted 1st Layer Leveling-Alternative to Bl Touch
Firmware artillery sidewender X1:Firmware TFT32-Equality 10P assistance-Alternative to BL Touch
Template files blender 2.81，STL，GCODE and simplify3d for 1st layer leveling test
表格式文件BLENDER 2.81，STL，GCODE和簡化FY3D用于1 capahttp的平滑測試：比特.ly/2fmewc9
X1 magnetic base with strap and pei layer pre-italled（31x31mm）
X1帶有彎曲和預意大利薄膜的磁基（310x31mm）
to reference videos used to support the improvements presented：
支持所提交的改進的參考視頻鏈接：
通道EZY3D@ULAB and original manual leveling work 1st layer in artillery X1
EZY3D頻道和原平滑工作一層手動平滑手冊X1http：
Wham Bam Systems Channel with detailed explanation of itallation and maintenance of magnetic base，strapping and pei
WHAM Bam Systems頻道，詳細解釋了意大利和磁基維修，F(xiàn)lege和Peicht：比特.ly/36kirzx
Jose A3D Channel used for revision configuration TMC2100 drive in artillery x1
Jose A3D頻道用于在Artillery X1 TMC2100進行修改
用于修改配置的三位一體通道TMC2100 Drive in Artillery X1
micmc運河，用于改裝Drive TMC2100，Artillery X1
Teaching tech channel used for revision transformation TMC2100 drive in artillery x1
用于修改傳動TMC2100在Artillery X1
|
共個文件
壓縮包大?。?64KB
|
||
|---|---|---|
微信小程序
微信掃碼打開此模型
迪威模型
微信掃碼支付