迪威網友22f8a3
發(fā)布時間：2020/12/26 8:45:00
2/4/29 Update: I have added ParametricAutoRewindSpoolHolder_V1_11_90_axel_w_spacergroove, print and use this axel if you are using the univeal spool re-winder
12/9/18 Update: Opened up the left hanger like the right hanger to make it easier to drop spools in. Updated right hanger to include flat for bottom of axel.
Hanging adapter for Parametric Auto-Rewind Spool Holder
Should work with 8mm axels between 106-151mm long, mine is 134mm long.
I used an 8mm M3 screw as a setscrew to hold the right arm in place.
Used a medium sized 3m command strip to hold the PTFE wall mount (for guide) to wall.
12/9/18 Update: Opened up the left hanger like the right hanger to make it easier to drop spools in. Updated right hanger to include flat for bottom of axel.
Hanging adapter for Parametric Auto-Rewind Spool Holder
Should work with 8mm axels between 106-151mm long, mine is 134mm long.
I used an 8mm M3 screw as a setscrew to hold the right arm in place.
Used a medium sized 3m command strip to hold the PTFE wall mount (for guide) to wall.
|
共個文件
壓縮包大?。?MB
|
||
|---|---|---|
微信小程序
微信掃碼打開此模型
迪威模型
微信掃碼支付